This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Assessment of Powder Metallurgy Machinability by Using TiCN/Al2O3 Cutting Tools
Technical Paper
2003-01-2870
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Machining Powder Metallurgy (P/M) components have been regarded as one of the main issues due to its unique porous structure. Porosity can cause regional vibration and decrease tool life. It can also lower the standard of surface finish. Manufacturers and researchers have searched for different machining technique to overcome the difficulties, such as P/M densities, hardness or the free machining additive. The CVD deposition TiCN/Al2O3 coating cutting tool has been used in this experiment to search its improved capability in the P/M components machining. This paper will attempt to discuss the cutting force measurement, chip formation, and surface finish analysis. A general analysis of the machinability in the specific workpiece has been shown to compare the same machining condition by using different cutting tools.
Authors
Citation
Chang, C., Smith, G., and Littlefair, G., "The Assessment of Powder Metallurgy Machinability by Using TiCN/Al2O3 Cutting Tools," SAE Technical Paper 2003-01-2870, 2003, https://doi.org/10.4271/2003-01-2870.Also In
References
- GB-219 Ferrous Powder Metallurgy Business Communications Company (BCC), Inc. 1998
- Metal Powder Industries Federation (MPIF) New Jersey, USA 2002
- Pease L. F. III, “Powder metallurgy materials” ASM Handbook, Vol. 9: Metallography and Microstructure ASM International 1994
- Nigarura, S L'Esperance, G. Roy, L. G. de Rege, A. Pease L. F. III, “The influence of powder processing on the nature of inclusion and its relation to the machinability of MnS pre-alloyed P/M parts” Proceedings of the Advances in Powder Metallurgy and Particulate Materials 4 1992
- Kutsche, U. Beiss, P. Jager, J. “Effective of density on Mechanical Properties, Thermal Conductivity, and Machinability of Sintered Stainless Steels,” Proceedings of the 1997 European Conference on Advances in Structural PM Component Production EPMA Munich, Germany 1997
- Cubberly, W. H. Bakerjian, R Tool and Manufacturing Engineers Handbook (TMEH) Society of Manufacturing Engineers USA 1989
- Smith, G. Advanced Machining: the Handbook of Cutting Technology IFS UK 1989
- Chang, C. Smith, G. Littlefair, G. “Machinability of Sintered Distaloy Components,” Proceedings of the SAE 2001 World Congress Society of Automotive Engineers (SAE) March 5-8 Michigan, USA 2001