Electrospun Tin Oxide Nanofibers with Different Precursor Solution

Article Preview

Abstract:

In this paper, electrospinning method was adopted to prepare tin oxide nanofibers membrane with three kinds of novel precursor solution PVP/C12H24O4Sn, PVP/ C4H10OSn and PVP/SnCl4. The morphology, surface element, thermal analysis and crystal structure of the fibers membrane were investigated by SEM, EDS, TG-DTA and XRD. The results showed that the organic/inorganic hybrid nanofibers with an average diameter of 300~700 nm can be obtained by electrospinning. But after calcined at 600°C, the loose and porous tin oxide nanofibers membrane with an average diameter of 100~250 nm can be obtained only by using PVP/SnCl4 as preceusor solution, moreover, it showed good fiber forming property. From XRD spectra, it was found that the rutile structure tin oxide finally obtained without other crystalline forms.

You might also be interested in these eBooks

Info:

Periodical:

Materials Science Forum (Volumes 675-677)

Pages:

275-278

Citation:

Online since:

February 2011

Export:

Price:

[1] M. R. Yang, S. Y. Chu and R. C. Chang: Sens. Actuators, B Vol. 122(2007), p.269.

Google Scholar

[2] J. Q. Xu, D. Wang and L.P. Qin: Sens. Actuators, B Vol. 137(2009), p.490.

Google Scholar

[3] H. J. Choi, H. K. Seong and J. H. Park: Inorg. Chim. Commun. Vol. 7(2004), p.809.

Google Scholar

[4] X.F. Song, Q. Qi and T. Zhang: Sens. Actuators, B Vol. 138(2009), p.368.

Google Scholar

[5] Z.X. Wang and L. Liu: Mater. Lett. Vol. 63(2009), p.917.

Google Scholar

[6] Y. Idota, T. Kubota and A. Matsufuji: Science Vol. 276 (1997), p.1395.

Google Scholar

[7] Z.Q. Liu, D.H. Zhang and S. Han: Adv. Mater. Vol. 15 (2003), p.1754.

Google Scholar

[8] E.N. Dattoli, Q. Wan and W. Guo: Nano Lett. Vol. 7 (2007), p.2463.

Google Scholar

[9] D. Li, T. J. T. McCann and Y. N. Xia: J. Am. Ceram. Soc. Vol. 89 (2006), p.1861.

Google Scholar

[10] Z.M. Huang, Y.Z. Zhang and M. Kotaki: Compos. Sci. Technol. Vol. 63 (2003), p.2223.

Google Scholar

[11] A. Frenot and I.S. Chronakis: Curr. Opin. Colloid Interface Sci. Vol. 8 (2003), p.64.

Google Scholar

[12] A. A. Shutov and E. Yu. Astakhov: Tech. Phys. Vol. 51 (2006), p.1093.

Google Scholar

[13] G.L. Ren, X.H. Xu and Q. Liu: React. Funct. Polym. Vol. 66 (2006), p.1559.

Google Scholar

[14] K. Onozuka, B. Ding and Y. Tsuge: Nanotechnology Vol. 17 (2006), p.1026.

Google Scholar

[15] S. Shukla, E. Brinley and H. J. Cho: Polymer Vol. 46(2005), p.12130.

Google Scholar

[16] S. S. Chang, S. O. Yoon and H. J. Park: Ceram. Int. Vol. 31(2005), p.405.

Google Scholar