Issue 69, 2017, Issue in Progress

Multifold enhancement of the output power of flexible thermoelectric generators made from cotton fabrics coated with conducting polymer

Abstract

Thermoelectric (TE) conversion of human body heat is highly desirable for powering microelectronic devices. However, most of the existing TE generators are not practical because they contain toxic substances, are difficult to process, are rigid and impermeable, or are unable to be produced on a large scale. Previously, we have demonstrated a flexible, air-permeable TE power generator fabricated from polyester fabric coated with a conducting polymer, poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate), and fine silver wires [Y. Du, et al., Sci. Rep., 2015, 5, 06411]. Here, we show a multifold enhancement of the output power of this type of flexible thermoelectric generator using poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) coated cotton fabric, and fine Constantan wires. A fabric device consisting of 5 TE units was found to generate a voltage output (V) of 18.7 mV and maximum output electrical power of 212.6 nW at a temperature difference (ΔT) of 74.3 K. The fabric generators can be rolled up and remain operational after being bent at different bending radii and in different directions. Furthermore, a TE generator has been shown to be stable even after 10 days of continuous operation at a ΔT up to ∼78 K. This fabric-based TE generator is seen to be useful for the development of self-powered, wearable electronic devices.

Graphical abstract: Multifold enhancement of the output power of flexible thermoelectric generators made from cotton fabrics coated with conducting polymer

Supplementary files

Article information

Article type
Paper
Submitted
05 Aug 2017
Accepted
04 Sep 2017
First published
11 Sep 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 43737-43742

Multifold enhancement of the output power of flexible thermoelectric generators made from cotton fabrics coated with conducting polymer

Y. Du, K. F. Cai, S. Z. Shen, R. Donelsonand, J. Y. Xu, H. X. Wang and T. Lin, RSC Adv., 2017, 7, 43737 DOI: 10.1039/C7RA08663F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements