Issue 25, 2017

Three-dimensional interpenetrating mesoporous carbon confining SnO2 particles for superior sodiation/desodiation properties

Abstract

Nanosized SnO2 particles (∼2 nm in diameter) are embedded in ordered mesoporous CMK-8 carbon with unique three-dimensional interconnected pore channels and used as a sodium-ion battery (NIB) anode. Due to the CMK-8 confinement effects, the growth of SnO2 is suppressed during synthesis, leading to high material electroactivity. The CMK-8 not only serves as an electronic conducting pathway, but also creates interpenetrating tunnels, which guarantee electrolyte accessibility and thus Na+ transport throughout the electrode. Moreover, the change in the SnO2 volume during sodiation/desodiation can be accommodated by the CMK-8 framework. With a high tap density of ∼1000 mg cm−3 (vs. ∼800 mg cm−3 for the conventional NIB anode, hard carbon), the SnO2/CMK-8 anode shows a high reversible capacity of 800 mA h g−1 and excellent rate capability, delivering 330 mA h g−1 in ∼10 min. The electrode charge storage mechanism is examined using synchrotron X-ray diffraction. We confirm that CMK-8 incorporation can effectively promote the SnO2–Sn conversion reaction and Sn–Na alloying reaction, which are known to be thermodynamically/kinetically difficult, increasing the electrode charge–discharge performance.

Graphical abstract: Three-dimensional interpenetrating mesoporous carbon confining SnO2 particles for superior sodiation/desodiation properties

Supplementary files

Article information

Article type
Paper
Submitted
30 Mar 2017
Accepted
19 May 2017
First published
23 May 2017

Nanoscale, 2017,9, 8674-8683

Three-dimensional interpenetrating mesoporous carbon confining SnO2 particles for superior sodiation/desodiation properties

J. Patra, P. C. Rath, C. Yang, D. Saikia, H. Kao and J. Chang, Nanoscale, 2017, 9, 8674 DOI: 10.1039/C7NR02260C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements