Abstract
The effect of Sn addition and heat treatment on the microstructure and properties of Cu-3Ti and Cu-2Ti alloys was studied. The microstructure and phase constituents were characterized by an optical microscope, x-ray diffractometer, and transmission electron microscope, and the electrical conductivity and hardness were determined as well. The results show that the as-cast microstructure of Cu-Ti-Sn alloys consists of α-Cu(Ti,Sn) and primary CuSn3Ti5 intermetallic compound. CuSn3Ti5 phase has a hexagonal structure with the lattice parameters a = 0.81737 nm, b = 0.81737 nm, and c = 0.55773 nm. With the increase of aging time, the electrical conductivity progressively increases, while the hardness increases and then decreases. After aging at 450 °C for 8 h, Cu-3Ti-2Sn alloy has an electrical conductivity of 23.1 MS/m and a hardness of 134.5 HV, and the electrical conductivity and hardness of Cu-2Ti-2Sn alloy are 21.5 MS/m and 119.3 HV, respectively. An appropriate aging is beneficial for the precipitation of coherent metastable β′-Cu4Ti phase, which can strengthen Cu-3Ti-2Sn and Cu-2Ti-2Sn alloys. However, a prolonged aging time results in the decrease of hardness due to the formation of incoherent equilibrium β-Cu3Ti phase. The presence of CuSn3Ti5 phase reduces the solute Ti content in the copper matrix and, thus, gives rise to the increase of the electrical conductivity of Cu-Ti-Sn alloys.
Similar content being viewed by others
References
W.A. Soffa and D.E. Laughlin, High-Strength Age Hardening Copper-Titanium Alloys, Prog. Mater. Sci., 2004, 49(3–4), p 347–366
S. Nagarjuna, M. Srinivas, K. Balasubramanian, and D.S. Sarma, On the Variation of Mechanical Properties with Solute Content in Cu-Ti Alloys, Mater. Sci. Eng. A., 1999, 259(1), p 34–42
C. Borchers, Catastrophic Nucleation During Decomposition of Cu-0.9at.%Ti, Phil. Magi. A., 1999, 79(3), p 537–547
P. Liu, F.Z. Ren, and S. G. Jia, 铜合金及其应用 (Copper Alloys and Applications), 1st ed., Chemical Industry Press, Beijing, 2007, p 110-112 [in Chinese]
D. Bozic, M. Mitkov, and M.T. Jovanovi, Structure and Microhardness of Precipitation/Dispersion Hardened Cu-Ti-B and Cu-Ti-Si Alloys, Mater. Charact., 1994, 32, p 97–103
S. Nagarjuna, K. Balasubramanian, and D.S. Sarma, Effect of Ti Additions on the Electrical Resistivity of Copper, Mater. Sci. Eng. A., 1997, 225(1–2), p 118–124
S. Nagarjuna, M. Srinivas, K. Balasubramanian, and D.S. Sarma, On the Deformation Characteristics of Solution Treated Cu-Ti Alloy, Scripta Metal. Mater., 1995, 33(9), p 1455–1460
S. Suzuki, K. Hirabayashi, H. Shibata, K. Mimural, M. Isshiki, and Y. Waseda, Electrical and Thermal Conductivities in Quenched and Aged High-Purity Cu-Ti Alloys, Scripta Mater., 2003, 48(4), p 431–435
R. Markandeya, S. Nagarjuna, and D.S. Sarma, Effect of Prior Cold Work on Age Hardening of Cu-4Ti-1Cr Alloy, Mater. Charact., 2005, 404(1–2), p 305–313
R. Markandeya, S. Nagarjuna, and D.S. Sarma, Precipitation Hardening of Cu-Ti-Cr Alloys, Mater. Sci. Eng. A., 2004, 371(1–2), p 291–305
S. Semboshi, T. Al-Kassab, R. Gemma, and R. Kirchheim, Microstructural Evolution of Cu-1at.%Ti Alloy Aged in a Hydrogen Atmosphere and Its Relation with the Electrical Conductivity, Ultramicroscopy, 2009, 109(5), p 593–598
T.J. Konno, R. Nishio, S. Semboshi, T. Obsuna, and E. Okunishi, Ageing Behavior of Cu-Ti-Al Alloy Observed by Transmission Electron Microscopy, J. Mater. Sci., 2008, 43, p 3761–3768
R. Markandeya, S. Nagarjuna, and D.S. Sarma, Precipitation Hardening of Cu-3Ti-1Cd Alloys, J. Mater. Eng. Perform., 2007, 16(5), p 640–646
V. Lebreton, D. Pachoutinski, and Y. Bienvenu, An Investigation of Microstructure and Mechanical Properties in Cu-Ti-Sn Alloys Rich in Copper, Mater. Sci. Eng. A., 2009, 508, p 83–92
B. Raeisiula and W.J. Poole, Electrical Resistivity Measurements: A Sensitive Tool for Studying Aluminum Alloys, Mater. Sci. Forum, 2006, 519–521, p 1391–1396
F.A. Guo, C.J. Xiang, C.X. Yang, X.M. Cao, S.G. Mu, and Y.Q. Tang, Study of Rare Earth Elements on the Physical and Mechanical Properties of a Cu-Fe-P-Cr Alloy, Mater. Sci. Eng. B., 2008, 147(1), p 1–6
Y. Feng, R.C. Wang, and C.Q. Peng, Influence of Ageing Treatments on Microstructure and Electrochemical Properties in Mg-8.8Hg-8Ga Alloy, Intermetallics, 2013, 33, p 120–125
R. Markandeya, S. Nagarjuna, D.V.V. Satyanarayana, and D.S. Sarma, Correlation of Structure and Flow Behavior of Cu-Ti-Cd Alloys, Mater. Sci. Eng. A., 2005, 428(1–2), p 233–243
R. Markandeya, S. Nagarjuna, and D.S. Sarma, Effect of Prior Cold Work on Age Hardening of Cu-3Ti-1Cr Alloy, Mater. Charact., 2006, 57(4–5), p 348–357
Acknowledgments
This research was supported by the National Natural Science Foundation of China (Nos. 51201132 and 51274163), the Research Program of Shaanxi Provincial Key Laboratory (13JS076), the China Scholarship Council, and Shaanxi Provincial Project of Special Foundation of Key Disciplines (2011HBSZS009).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, X., Chen, C., Guo, T. et al. Microstructure and Properties of Ternary Cu-Ti-Sn Alloy. J. of Materi Eng and Perform 24, 2738–2743 (2015). https://doi.org/10.1007/s11665-015-1483-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-015-1483-4