Skip to main content

Advertisement

Log in

Geopolitical-related supply risk assessment as a complement to environmental impact assessment: the case of electric vehicles

  • ASSESSING AND MANAGING LIFE CYCLES OF ELECTRIC VEHICLES
  • Published:
The International Journal of Life Cycle Assessment Aims and scope Submit manuscript

Abstract

Purpose

Introducing a geopolitical-related supply risk (GeoPolRisk) into the life cycle sustainability assessment (LCSA) framework adds a criticality aspect to the current life cycle assessment (LCA) framework to more meaningfully address direct impacts on Natural Resource AoP. The weakness of resource indicators in LCA has been the topic of discussion within the life cycle community for some time. This paper presents a case study on how to proceed towards the integration of resource criticality assessment into LCA under the LCSA. The paper aims at highlighting the significance of introducing the GeoPolRisk indicator to complement and extend the established environmental LCA impact categories.

Methods

A newly developed GeoPolRisk indicator proposed by Gemechu et al., J Ind Ecol (2015) was applied to metals used in the life cycle of an electric vehicle, and the results are compared with an attributional LCA of the same resources. The inventory data is based on the publication by Hawkins et al., J Ind Ecol 17:53–64 (2013), which provides a current, transparent, and detailed life cycle inventory data of a European representative first-generation battery small electric vehicle.

Results and discussion

From the 14 investigated metals, copper, aluminum, and steel are the most dominant elements that pose high environmental impacts. On the other hand, magnesium and neodymium show relatively higher supply risk when geopolitical elements are considered. While, the environmental indicator results all tend to point the same hotspots which arise from the substantial use of resources in the electric vehicle’s life cycle, the GeoPolRisk highlights that there are important elements present in very small amounts but crucial to the overall LCSA. It provides a complementary sustainability dimension that can be added to conventional LCA as an important extension within LCSA.

Conclusions

Resource challenges in a short-term time perspective can be better addressed by including social and geopolitical factors in addition to the conventional indicators which are based on their geological availability. This is more significant for modern technologies such as electronic devices in which critical resources contribute to important components. The case study advances the use of the GeoPolRisk assessment method but does still face certain limitations that need further elaboration; however, directions for future research are promising.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3

Similar content being viewed by others

References

  • Althaus H-J, Classen M (2005) Life cycle inventories of metals and methodological aspects of inventorying material resources in ecoinvent. Int J Life Cycle Assess 10:43–49

    Article  CAS  Google Scholar 

  • Andersson BA, Råde I (2001) Metal resource constraints for electric-vehicle batteries. Transp Res Part D: Transp Environ 6:297–324(28)

    Article  Google Scholar 

  • DOE (2011) Critical materials strategy. US Department of Energy, Washington

    Google Scholar 

  • Erdmann L, Graedel TE (2011) Criticality of non-fuel minerals: a review of major approaches and analyses. Environ Sci Technol 45:7620–7630

    Article  CAS  Google Scholar 

  • European Commission (2010) Critical raw materials for the EU, Report of the Ad-hoc Working Group on defining critical raw materials. Eucom 39:1–84

    Google Scholar 

  • European Commission (2011) International Reference Life Cycle Data System (ILCD) Handbook : Recommendations for Life Cycle Impact Assessment in the European context. EUR 24571 EN. Eur Comm 159. doi: 10.278/33030

  • European Commission (2012) Security of supply and scarcity of raw materials: towards a methodological framework for sustainability assessment. Joint European Centre–Institute for Environment and Sustainability

  • European Commission (2014) Report on critical raw materials for the EU: report of the Ad-Hoc Working Group on Defining Critical Raw Materials. Brussels, Belgium

  • Finkbeiner M, Schau EM, Lehmann A, Traverso M (2010) Towards life cycle sustainability assessment. Sustainability 2:3309–3322

    Article  Google Scholar 

  • Gaines L, Nelson P (2010) Lithium-ion batteries: examining material demand and recycling issues. Proc. 2010 TMS Annu Meet Exhib Sustain Mater Process Prod Symp

  • Gemechu ED, Helbig C, Sonnemann G et al (2015) Import-based indicator for the geopolitical supply risk of raw materials in life cycle sustainability assessments. J Ind Ecol. doi:10.1111/jiec.12279

  • Goedkoop M, Heijungs R, Huijbregts M et al. (2013) ReCiPe 2008: A life cycle impact assessment method which comprises harmonised category indicators at the midpoint and the endpoint level - Report I: Characterisation

  • Graedel TE, Barr R, Chandler C et al (2012) Methodology of metal criticality determination. Environ Sci Technol 46:1063–1070

    Article  CAS  Google Scholar 

  • Graedel TE, Harper EM, Nassar NT, Reck BK (2013) On the materials basis of modern society. Proc Natl Acad Sci. doi:10.1073/pnas.1312752110

    Google Scholar 

  • Guinée JB, Gorrée M, Heijungs R et al (2002) Handbook on life cycle assessment: operational guide to the ISO standards. Kluwer Academic Publishers, Dordrecht

    Google Scholar 

  • Hawkins TR, Gausen OM, Strømman AH (2012) Environmental impacts of hybrid and electric vehicles—a review. Int J Life Cycle Assess 17:997–1014

    Article  CAS  Google Scholar 

  • Hawkins TR, Singh B, Majeau-Bettez G, Strømman AH (2013) Comparative environmental life cycle assessment of conventional and electric vehicles. J Ind Ecol 17:53–64

    Article  CAS  Google Scholar 

  • Herrington R (2013) Road map to mineral supply. Nat Geosci 6:892–894

    Article  CAS  Google Scholar 

  • ISO (2006) ISO 14040 International Standard. In: Environmental management—life cycle assessment—requirements and guidelines

  • Kloepffer W (2008) Life cycle sustainability assessment of products. Int J Life Cycle Assess 13:89–95

    Article  Google Scholar 

  • Long K, Van Gosen B, Foley N, Cordier D (2012) The principal rare earth elements deposits of the United States: a summary of domestic deposits and a global perspective. In: Sinding-Larsen R, Wellmer F-W (eds) Non-Renewable Resour. Issues SE - 7. Springer, Netherlands, pp 131–155

    Chapter  Google Scholar 

  • Mancini L, Sala S, Recchioni M et al (2015) Potential of life cycle assessment for supporting the management of critical raw materials. Int J Life Cycle Assess 20:100–116

    Article  Google Scholar 

  • Moran D, McBain D, Kanemoto K et al (2014) Global supply chains of coltan. J Ind Ecol. doi:10.1111/jiec.12206

    Google Scholar 

  • Moss R, Tzimas E, Willis P et al. (2013a) Critical metals in the path towards the decarbonisation of the EU energy sector—assessing rare metals as supply-chain bottlenecks in low-carbon energy technologies. Publication Office of the European Union, Luxembourg

  • Moss RL, Tzimas E, Kara H et al (2013b) The potential risks from metals bottlenecks to the deployment of strategic energy technologies. Energy Policy 55:556–564

    Article  CAS  Google Scholar 

  • Nassar NT, Barr R, Browning M et al (2012) Criticality of the geological copper family. Environ Sci Technol 46:1071–1078

    Article  CAS  Google Scholar 

  • National Research Council (2008) Minerals, critical minerals, and the U.S. economy. The National Academies Press, Washington

    Google Scholar 

  • Nordelöf A, Messagie M, Tillman AM et al (2014) Environmental impacts of hybrid, plug-in hybrid, and battery electric vehicles—what can we learn from life cycle assessment? Int J Life Cycle Assess 19:1866–1890

    Article  Google Scholar 

  • Norgate TE, Jahanshahi S, Rankin WJ (2007) Assessing the environmental impact of metal production processes. J Clean Prod 15:838–848

    Article  Google Scholar 

  • Rydh CJ, Svärd B (2003) Impact on global metal flows arising from the use of portable rechargeable batteries. Sci Total Environ 302:167–184

    Article  CAS  Google Scholar 

  • Schneider L, Berger M, Schüler-Hainsch E et al (2014) The economic resource scarcity potential (ESP) for evaluating resource use based on life cycle assessment. Int J Life Cycle Assess 19:601–610

    Article  Google Scholar 

  • Sonnemann G, Castells F, Schuhmacher M (2003) Integrated life-cycle and risk assessment for industrial processes. Lewish Publishers, Boca Raton

    Book  Google Scholar 

  • Sonnemann G, Gemechu ED, Adibi N et al (2015) From a critical review to a conceptual framework for integrating the criticality of resources into life cycle sustainability assessment. J Clean Prod 94:20–24

    Article  Google Scholar 

  • UN (2014) United Nations Commodity Trade Statistics Database. In: United Nations Stat. Div. http://comtrade.un.org/db/

  • UNEP (2011) Towards a life cycle sustainability assessment: making informed choices on products. UNEP/SETAC, Paris

  • USGS (2013) Mineral commodity summaries 2013. U.S. Geological Survey, Washington

    Google Scholar 

  • USGS (2014) Mineral commodity summaries 2014. U.S. Geological Survey, Washington

    Google Scholar 

  • USGS (2015) Mineral commodity summaries 2015. U.S. Geological Survey, Washington

    Google Scholar 

  • Valdivia S, Ugaya CML, Hildenbrand J et al (2013) A UNEP/SETAC aproach towards a life cycle sustainability assessment—our contribution to Rio + 20. Int J Life Cycle Assess 18:1673–1685

    Article  Google Scholar 

  • World Bank (2014) Worldwide Governance Indicators. http://data.worldbank.org/data-catalog/worldwide-governance-indicators

  • WTO (2013) China—measures related to the exportation of various raw materials—reports of the Appellate Body. Geneva, Switzerland

  • WTO (2014) China—measures related to the exportation of rare earths, tungsten and molybdenum—reports of the Appellate Body. Geneva, Switzerland

  • Young SB (2015) Responsible sourcing of metals: certification approaches for conflict minerals and conflict-free metals

  • Young SB, Dias G (2011) LCM of metals supply to electronics: tracking and tracing “Conflict Minerals.” Towar. Life Cycle Sustain. Manag.-Aug 29–31. Berlin, Germany, p 12

  • Young SB, Yuan Z, Dias G (2014) Prospects for sustainability certification of metals. Metal Res Technol 111:131–135

    Article  Google Scholar 

  • Zepf V, Reller A, Rennie C et al. (2014) Materials critical to the energy industry. An introduction, 2nd edn. London, United Kingdom

Download references

Acknowledgments

We would like to thank Christoph Helbig for helping to develop the Geopolitical Supply Risk method. The authors also acknowledge the financial support of the Region of Aquitaine for the Chair on Life Cycle Assessment (CyVi) at the University of Bordeaux to carry out this work.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Guido Sonnemann.

Additional information

Responsible editor: Alexandra Pehlken

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gemechu, E.D., Sonnemann, G. & Young, S.B. Geopolitical-related supply risk assessment as a complement to environmental impact assessment: the case of electric vehicles. Int J Life Cycle Assess 22, 31–39 (2017). https://doi.org/10.1007/s11367-015-0917-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11367-015-0917-4

Keywords

Navigation