Abstract
Light-weighting of vehicles drives the development of Aluminium alloys with improved strength and formability. An opportunity to achieve this goal is using Scandium (Sc). The beneficial effects from Sc comes from the formation of nano-sized Al3Sc dispersoids. Detrimental interactions between Sc and Silicon (Si) has limited the uptake of Sc in 6xxx alloys. The first step towards developing Sc containing 6xxx-series is to understand the as-cast microstructure and the effect of subsequent heat treatment on the dispersoids. This work uses isochronal ageing trials on a series of Al-Mg-Si-(Sc)-(Zr) model alloys. The evolution of hardness and conductivity is recorded to indirectly characterize the precipitate sequence. Transmission electron microscopy is used to further characterize the morphology and kinetics of MgSi precipitates and Sc/Zr dispersoids. The precipitation of Sc was altered by the presence of Si, and hence it is concluded that a non-traditional homogenization treatment is required for these alloys.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
I. Polmear (2005), Light Alloys (Fourth Edition), Oxford, England.
J. Röyset (2007), Scandium in Aluminium Alloys Overview: Physical Metallurgy, Properties and Applications, Metallurgical Science and Technology. 25:11–21.
T. Langan (2012) Aluminum-zinc-magnesium-scandium alloys and methods of fabricating US. Patent 8133331B2. 18 March 2010.
M.L. Kharakterova, D.G. Eskin, L.S. Toropova, Precipitation hardening in ternary alloys of the Al∙Sc∙Cu and Al∙Sc∙Si systems, Acta Metallurgica et Materialia 42(7) (1994) 2285–2290.
V.V. Zakharov (2003) Effect of Scandium on the Structure and Properties of Aluminum Alloys, Metal Science and Heat Treatment 45 7:246–253.
M.G. Mousavi, C.E. Cross, Ø. Grong (1999) Effect of scandium and titanium–boron on grain refinement and hot cracking of aluminium alloy 7108, Science and Technology of Welding and Joining 4 6:381–388.
J.H. Kim, J.H. Kim, J.T. Yeom, D.-G. Lee, S.G. Lim, N.K. Park (2007) Effect of scandium content on the hot extrusion of Al–Zn–Mg–(Sc) alloy, Journal of Materials Processing Technology 187–188:635-639.
C. Fuller, J. Murray, D. Seidman, (2005) Temporal evolution of the nanostructure of AI(Sc,Zr) alloys: Part I - Chemical compositions of Al-3(Sc1-xZrx) precipitates’ 53 20:5401–5413.
E.A. Marquis, D.N. Seidman, Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys (2001), Acta Materialia 49 11:1909–1919.
T. Dorin, M. Ramajayam, J. Lamb, T. Langan, Effect of Sc and Zr additions on the microstructure/strength of Al-Cu binary alloys (2017) Materials Science and Engineering: A 707:58–64.
T. Dorin, M. Ramajayam, A. Vahid, T. Langan (2018) Aluminium Scandium Alloys, Elsevier, New York.
A. Tolley, V. Radmilovic, U. Dahmen (2005) Segregation in Al 3 (Sc, Zr) precipitates in Al–Sc–Zr alloys, Scripta materialia 52 7:621–625.
L.L. Rokhlin, N.R. Bochvar, O.V. Rybal’chenko, I.E. Tarytina, A.V. Sukhanov (2012) Phase equilibria in aluminum-rich Al-Sc-Si alloys during solidification, Russian Metallurgy (Metally) 7:606–611.
O. Beeri, D.C. Dunand, D.N. Seidman, Roles of impurities on precipitation kinetics of dilute Al–Sc alloys (2010) Materials Science and Engineering: A 52715:3501–3509.
G. Du, J. Deng, Y. Wang, D. Yan, L. Rong, Precipitation of (Al,Si)3Sc in an Al–Sc–Si alloy (2009) Scripta Materialia 615:532–535.
L. Lityńska, J. Dutkiewicz, W. Maziarz, P. Ochin (2010) Structure and properties of Al-Mg-Si alloys with Zr and Sc additions produced by melt spinning and twin rolling casting techniques Kovove Mater 48:9–15.
T. Dorin, M. Ramajayam, T.J. Langan (2012) Effects of Mg, Si, and Cu on the formation of the Al3Sc/Al3Zr dispersoids, Paper presented at the International Conference on Aluminium Alloys 16, Monreal, Canada, 2018.
B.I. Elagin, V.V. Zakharov, T.D. Rostova (1993), Some features of the cast structure of alloys of the Al–Sc system, Metal Science and Heat Treatment 35 6:317–319.
J. Røyset, H. Hovland, N. Ryum, An Investigation of Dilute Al-Sc-Si Alloys (2002) Materials Science Forum 396–402:619-624.
C. Booth-Morrison, Z. Mao, M. Diaz, D.C. Dunand, C. Wolverton, D.N. Seidman (2012), Role of silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloys, Acta Materialia 60 12:4740–4752.
L.L. Rokhlin, N.R. Bochvar, I.E. Tarytina (2015) Joint effect of scandium and zirconium on the structure and the strength properties of Al–Mg2Si–Based alloys, Russian Metallurgy (Metally) 9:726–731.
L.L. Rokhlin, N.R. Bochvar, I.E. Tarytina (2015) Joint effect of scandium and zirconium on the recrystallization of aluminum Al–Mg2Si alloys, Russian Metallurgy (Metally) 5:381–388.
J. Röyset, U. Tundal, S.R. Skjervold, G. Waterloo, C. Braathen, O. Reiso (2004) An Investigation of Sc Addition on the Extrudability, recrystalisation resistance and Mechanical properties of a 6082 and 7108 Alloy, Proc. 9th Int. Conf. on Aluminium Alloys,, Brisbane, Australia 246–251.
M. Vlach, B. Smola, I. Stulikova, V. Oceanasek (2009) Microstructure and mechanical properties of the AA6082 aluminium alloy with small additions of Sc and Zr, International Journal of Materials Research 100(3) 420–423.
E.P. Kwon, K.D. Woo, S.H. Kim, D.S. Kang, K.J. Lee, J.Y. Jeon, The effect of an addition of Sc and Zr on the precipitation behavior of AA6061 alloy, Metals and Materials International 16 5:701–707.
M. Vlach, J. Čížek, B. Smola, O. Melikhova, M. Vlček, V. Kodetová, H. Kudrnová, P. Hruška (2017) Heat treatment and age hardening of Al–Si–Mg–Mn commercial alloy with addition of Sc and Zr, Materials Characterization 129:1–8.
S.-I. Fujikawa, M. Sugaya, H. Takei, K.-I. Hirano (1979) Solid solubility and residual resistivity of scandium in aluminum, Journal of the Less Common Metals 63 1:87–97.
H. Seyedrezai, D. Grebennikov, P. Mascher, H.S. Zurob (2009) Study of the early stages of clustering in Al–Mg–Si alloys using the electrical resistivity measurements, Materials Science and Engineering: A 525 1:186–191.
T. Sheppard (1999) Extrusion of Aluminium Alloys, Springer, New York.
J. Røyset, N. Ryum, Scandium in aluminium alloys (2005) International Materials Reviews, 50:19–44.
K. Mester, B. Rouxel, T. Langan, J. Lamb, M. Barnett, T. Dorin (2018) Understanding the Co-precipitation Mechanisms of Al3(Sc, Zr) with Strengthening Phases in Al–Cu–Li Model Alloys. Paper presented at the TMS Annual Meeting, Phoenix, Arizona, 11–15 March 2018.
B. Rouxel, K. Mester, A. Vahid, J. Lamb, T. Langan, T. Dorin (2018), Influence of the Al3(Sc,Zr) Dispersoids and the Stretching on the Natural Ageing Behavior of a Binary Al-4 wt%Cu Alloys. Paper presented at the TMS Annual Meeting, Phoenix, Arizona, 11–15 March 2018.
Acknowledgements
The authors would like to acknowledge Clean TeQ for providing in-kind Al-Sc master alloys. Dave Gray is warmly thanked for casting the alloys used in this project. Deakin University’s Advanced Characterization Facility is acknowledged for use of the JEOL JEM 2100F transmission electron microscope.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Babaniaris, S., Ramajayam, M., Jiang, L., Langan, T., Dorin, T. (2019). Developing an Optimized Homogenization Process for Sc and Zr Containing Al-Mg-Si Alloys. In: Chesonis, C. (eds) Light Metals 2019. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-05864-7_181
Download citation
DOI: https://doi.org/10.1007/978-3-030-05864-7_181
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-05863-0
Online ISBN: 978-3-030-05864-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)